举例分析路由器设置方案路由器静态路由怎么配置( 三 )

5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/24/30 ms
3：在 AR1 上直接 ping AR3 将不通，需要配置一条去方向以及回来方向的静态路由<AR1>ping 10.0.0.2
PING 10.0.0.2: 56 data bytes, press CTRL_C to break
Request time out
Request time out
在 R1 与 R3 上分别配置静态路由：
[AR1]ip route-static 10.0.0.0 255.255.255.0 192.168.10.2
[AR3]ip route-static 192.168.10.0 24 10.0.0.1
4：再测试连通性：
[AR1]ping 10.0.0.2
PING 10.0.0.2: 56 data bytes, press CTRL_C to break
Reply from 10.0.0.2: bytes=56 Sequence=1 ttl=254 time=60 ms
Reply from 10.0.0.2: bytes=56 Sequence=2 ttl=254 time=20 ms
Reply from 10.0.0.2: bytes=56 Sequence=3 ttl=254 time=20 ms
5：查看路由表：
<AR2>display ip routing-table
Route Flags: R – relay, D – download to fib
——————————————————————————
Routing Tables: Public
Destinations : 10 Routes : 10
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.0.0.0/24 Direct 0 0 D 10.0.0.1 GigabitEthernet
0/0/1
10.0.0.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
10.0.0.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
192.168.10.0/24 Direct 0 0 D 192.168.10.2 GigabitEthernet
0/0/0
192.168.10.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
192.168.10.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0

以上关于本文的内容，仅作参考！温馨提示：如遇健康、疾病相关的问题，请您及时就医或请专业人士给予相关指导!

「四川龙网」www.sichuanlong.com小编还为您精选了以下内容，希望对您有所帮助：

举例分析路由器设置方案 路由器静态路由怎么配置( 三 )

举例分析路由器设置方案路由器静态路由怎么配置( 三 )